Varnish
Finishfit® WBC Gloss FCM 1860
Dispersion varnish – migration reduced
Finishfit FCM 1860
Finishfit® WBC Gloss FCM 1860 (= FCM, suitable for food packaging printing), is recommended for inline coating in sheetfed offset/coating unit (chambered doctor blade). The varnish is also suitable for offline coating with dry, conventional printing inks. In both cases, it can be applied over a large area without water.
Finishfit® WBC Gloss FCM 1860 is suitable for the use on the side of a print product facing away from the foodstuff. The print product should meet the requirements of Regulation (EC) 1935/2004, Art. 3.
Finishfit® WBC Gloss FCM 1860 has been specially developed for maximum machine speed with minimum transfer times between printing and finishing.
Properties
- Suitable for indirect food contact
- Drying with IR and hot air
- Good rub resistance
- Good wet blocking resistance
- Fast drying
- One-sided application recommended
- Long delivery extension recommended
- Suitable for paper and cardboard
- Standard viscosity 35 – 50 sec. measured at 20°C (68°F) with a viscosity cup DIN 4mm
Application
- Stir well before using
- The properties depend on the substrate and the application quantity
- Powder spraying if required
- Use only printing inks which meet all fastness standards according to DIN ISO 2836
Additives
- For cleaning flexo engraved rollers we recommend Cleanfit Anilox 2259
Storage
- Protect from frost, heat and direct sun light
- Storage only in original packaging at 10 – 30 °C (50 – 86 °F)
- Unopened and correctly stored, Finishfit® WBC Gloss FCM 1860 has a shelf life of 12 months from delivery date
Standard Packaging
- 25 kg can
- 220 kg drum
- 1.050 kg container/IBC
Note: This technical description is intended to inform and advise you. It corresponds to our current state of knowledge. However, since the specific application depends on a number of factors over which we have no influence, no guarantee and liability for the pressure failure can be derived.