Finishfit® WBC Barrier FCM DFC 1929

Finishfit^® WBC Barrier FCM DFC 1929 (DFC = direct food contact, suitable for direct food contact) is recommended for inline coating in sheetfed offset/coating unit (chambered doc-tor blade). The varnish is also suitable for offline coating with dry, conventional inks. In both cases, it can be used over a large area without water.

Finishfit^®WBC Barrier FCM DFC 1929 is suitable for the use on the non-food side of a print-ed product which is to meet the requirements of Regulation (EC) No. 1935/2004, Art. 3. In addition, Finishfit® WBC Barrier FCM DFC 1929 can be used in direct food contact. This has been confirmed by an independent analytical institute (SQTS) on the basis of a practical print sample.

Finishfit^®WBC Barrier FCM DFC 1929 has been specially developed for maximum machine speed with minimum transfer times between printing and finishing.

Properties

• Suitable for direct food contact
• Barrier against grease and water
• Drying by IR and hot air
• Wet block resistant
• Drying by IR and hot air
• Excellent rub resistance
• Very good wet-blocking resistance
• Double coating to increase barrier properties is recommended
• Minimum application quantity 6 - 8 g/m²
• Long delivery recommended
• Can be used on paper and cardboard
• Standard viscosity 40 - 45 sec., measured at 20°C (68° F), DIN 4mm viscosity cup

Application

• Stir well before use
• The properties depend on the substrate and the application quantity
• Powder spraying if required
• Only use printing inks that are solvent, alcali and spirit resistant according to DIN ISO 2836

Additives

• For cleaning flexo engraved rollers we recommend Cleanfit Anilox 2259

Storage

• Protect from frost, heat and direct sunlight
• Storage only in original packaging at 10 – 30 °C (50 – 86° F)
• Unopened and correctly stored Finishfit® WBC Barrier FCM DFC 1929 has a shelf life of 12 months from date of delivery

Standard Packaging

• 25 kg can
• 125 kg drum
• 220 kg drum
• 1,050 kg container/ IBC