Standard Process Inks
Power Protect LT
Power Protect LT
The ink series is a modern all-round series designed for a wide range of applications. It is mineral oil-free, duct fresh and formulated based on renewable raw materials.
This ink series fulfills following criteria:
- Cobalt-free
- Suitable for all types of perfecting machines
- Suitable for absorbent substrates
- Low tack
- Good deinkability
- Superb printability and runability
- Very good rub resistance
- Fast setting
- Superb ink/water balance
- Very low misting tendency
- Not recommended for printing on food packaging
Norms
- Conforms to the requirements of ISO 2846 and ISO 12647-2 and achieves a neutral grey balance with corresponding tonal range
Properties
Fastnesses
| Item No. | Light | Transp | Spirit | Nitro | Alkali | |
|---|---|---|---|---|---|---|
| Power Protect LT Y | 133955 | 5 | + | + | + | + |
| Power Protect LT M | 133956 | 5 | + | + | + | − |
| Power Protect LT C | 133957 | 8 | + | + | + | + |
| Power Protect LT B | 133958 | 8 | − | + | + | + |
+ property given, − property not given
Printing Additives
| Additives | Item No. | Dosage |
|---|---|---|
| Extrafit Ink Reducer | 071 | max. 5% |
| Extrafit Ink Gel | 348 | max. 5% |
| Extrafit Ink Dryer | 2001 | max. 5% |
Storage
- Protect from frost, heat and direct sunlight.
- Store only in original containers at 10 – 25 °C / 50 – 77 °F
- Unopened and correctly stored, the inks have a shelf life of 24 months from the date of delivery.
Note: This technical description is intended to inform and advise you. It corresponds to our current state of knowledge. However, since the specific application depends on a number of factors over which we have no influence, no guarantee and liability for the pressure failure can be derived.