Standard Process Inks
Performance Pro
Performance Pro
This ink series is a modern series designed to achieve an excellent rub resistance on critical substrates. It is mineral oil-free, semi-duct fresh and formulated based on renewable raw materials.
This ink series fulfils following criteria:
- Suitable for all types of perfecting machines
- Suitable for absorbent substrates
- Good printability
- Good deinkability
- Superb rub resistance
- Medium setting
- Fast drying
- Superb ink/water balance
- Not recommended for printing on food contact materials (FCM)
- This ink series is suitable for printing with 'Blauer Engel' (DE-UZ 195)
Norms
- Conforms to the requirements of ISO 2846 and ISO 12647-2 and achieves a neutral grey balance with corresponding tonal range
- Suitable for manufacturing toys in accordance with the general chemical safety require-ments in Annex II of the Toy Safety Directive 2009/48/EC and the migration limits specified in the standard EN 71-3
Properties
Fastnesses
| Series | item no. | light | transp. | sprit | nitro | alcali |
|---|---|---|---|---|---|---|
| Performance Pro Y | 139005 | 5 | + | + | + | + |
| Performance Pro M | 139006 | 5 | + | + | + | - |
| Performance Pro C | 139007 | 8 | + | + | + | + |
| Performance Pro B | 139008 | 8 | - | + | + | + |
+property given, - property not given
Printing Additives
| Additiv | Item no. | Dosage |
|---|---|---|
| Extrafit Ink Reducer | 071 | max. 5% |
| Extrafit Ink Gel | 348 | max. 5% |
| Extrafit Ink Drier | 2001 | max. 5% |
Storage
- Protect from frost, heat and direct sunlight
- Storage only in original containers at 10 - 30 °C
- Unopened and stored correctly, the product has a shelf life of 24 months from the date of delivery
Note: This technical description is intended to inform and advise you. It corresponds to our current state of knowledge. However, since the specific application depends on a number of factors over which we have no influence, no guarantee and liability for the pressure failure can be derived.