Special Process Inks

aniva® Plus

aniva® Plus

The aniva® Plus Series is a highly pigmented ink type and an indispensable component of the aniva® system. This is a standardisation system in the offset area with a considerably extended color space. It is mineral oil-free, duct fresh and formulated based on renewable raw materials.

ICC profiles as well as color tone and color strength of the printing inks are attuned to one another. The aniva® inks are printed with new standard density values (→ Black 2.4, Cyan 1.9, Magenta 1.8 and Yellow 1.7).

This ink series fulfills following criteria:

  • Cobalt-free
  • Suitable for all types of perfecting machines
  • Suitable for absorbent substrates
  • Superb printability and runability
  • Very good rub resistance
  • Medium setting
  • Superb ink/water balance
  • Fast post processig
  • Not recommended for printing on food packaging

Norms

  • Conforms to the requirements of ISO 2846 and ISO 12647-2 and achieves a neutral grey balance with corresponding tonal range

Properties

Fastnesses

Item No. Light Transp Spirit Nitro Alkali
aniva® Plus Y 130545 5 + + + +
aniva® Plus M 130546 5 + + +
aniva® Plus C 130547 8 + + + +
aniva® Plus K 130548 8 + + +

+ property given, − property not given

Printing Additives

Additives Item No. Dosage
Extrafit Ink Reducer 071 max. 5%
Extrafit Ink Gel 348 max. 5%
Extrafit Ink Dryer 2001 max. 5%

Storage

  • Protect from frost, heat and direct sunlight.
  • Store only in original containers at 10 – 25 °C / 50 – 77 °F
  • Unopened and correctly stored, the inks have a shelf life of 24 months from the date of delivery.
Note: This technical description is intended to inform and advise you. It corresponds to our current state of knowledge. However, since the specific application depends on a number of factors over which we have no influence, no guarantee and liability for the pressure failure can be derived.